Introducing the SDAVGS motorized fold-curtain system - the cost-effective solution for those seeking a versatile and reliable window cover.
This state-of-the-art system is designed to be installed effortlessly on walls or ceilings and is constructed with the highest quality materials and components, thanks to its solid case design is is making an excellent choice for large window dimensions.
The SDAVGS is a complete, ready-to-use system that comes equipped with the appropriate number of drums and fixing profiles, as well as Velcro hooks already attached, ensuring a seamless and hassle-free installation process.
Whether you're looking to outfit a residential or commercial space, the SDAVGS motorized fold-curtain system is the ideal solution for those seeking a high quality and cost-effective versatile window coverage solution, especially when used in combination with home automation.
| Category | Nature | Value |
| Input | AC voltage | 230 VAC |
| Frequency | 50 Hz | |
| AC current | 1.0 A max | |
| Power | 121 W | |
| Cable length | 2 m | |
| Cabling conductors & size | 4G1,5mm² flexible, white coating | |
| Cabling color code | Black = R1 rotate direction 1 | |
| Brown = R2 rotate direction 2 | ||
| Blue = COM common neuter | ||
| Green/Yellow = PE earth | ||
| Motor / Loads | Torque | 85 ~ 264 VAC 13 Nm |
| Maximum Load | 25 kg | |
| Revolutions | 14 / min | |
| Duty Cycle | 50% ±4 min | |
| Extension speed | <0,2 m/sec for last 40cm | |
| Thermal protection | when activated it stays on for 20 min | |
| Ingres protection | IP 20 | |
| CE Norm | DIN EN 13659 & EN 12045 | |
| System casing | Material | Aluminum |
| Color | White powdercoating | |
| Minimum length | 70 cm | |
| Maximum length | 580 cm | |
| Maximum travel height | 550 cm | |
| Dimension W x H | 60 x 68 mm | |
| Mounting level | Horizontal only (leveled) | |
| Mounting fixing (wall and/or ceiling) | 90° L-profile hooks | |
| Curtain fixing (on casing) | Velcro hook mounted | |
| System adjustment | Top & Bottom mechanical limits | on motor with hex tool (see procedure) |
| Velbus blinder setup | see procedure | Textile (not included) |
| Curtain fixing (on textile) | Velcro loop 20mm high to be foreseen | |
| Number of cord drums | every 40 cm + 1 (included) | |
| Number of rods (full length) | every 20 ~25 cm min ø7 mm (in hem) | |
| Bottom weighting bar (full length) | 1 in hem (± 15 x 5 mm) | |
| Number of rod rings (must be stiched) | # drums x (# rods + bottom bar) | |
| Setting | ± 3 days, depending on textile nature |
The motor doesn't work |
||
| Possible Causes | Diagnose | Solutions |
| no mains voltage present | check the fuse | reset the fuse |
| check the mains voltage with a multimeter | follow the circuit until the interruption is found | |
| check the motor connectivity | connect according to the manual | |
| no home automation command | adapt the home automation logic | |
| home automation command too short | adapt the home automation logic | |
| connection connection | Blue conductor not connected | connect according to the manual |
| wrongly connected conductors | connect according to the manual | |
| overloaded | mechanical blockage | remove the obstacle |
| too heavy curtain | stay within the specifications (max 25kg) | |
| run for a too long time (duty cycle) | wait 20 minutes until the motor has cooled down | |
| too often up and down (duty cycle) | wait 20 minutes until the motor has cooled down | |
| endposition reached | endposition reached | adapt the endpoints with the hex tool |
Rotation direction is wrong |
||
| Possible Causes | Diagnose | Solutions |
| connection | Brown and Black conductors switched | Switch Brown and Black conductors |
| home automation | Domotica knoppen reageren omgekeerd | adapt the home automation logic |
Motor stops between the endpoints |
||
| Possible Causes | Diagnose | Solutions |
| home automation | command not correct | adapt the home automation logic |
| overloaded overloaded | run for a too long time (duty cycle) | wait 20 minutes until the motor has cooled down |
| too often up and down (duty cycle) | wait 20 minutes until the motor has cooled down | |
Motor works only in one direction |
||
| Possible Causes | Diagnose | Solutions |
| home automation | command not correct | adapt the home automation logic |
| endposition reached | endposition reached | adapt the endpoints with the hex tool |
| connection | Brown or Black conductor not connected | connect according to the manual |